Dr. Kaushal Kumar

Associate Professor – Engineering & Technology

Dr. Kaushal Kumar

Interest Area(s)

  • Thermal Engineering
  • Materials, Coating and erosion wear
  • Tribology and lubrication
  • Rheology and fluids
  • Application and Environment aspects of mechanical engineering
Since 2011, he has taught many subjects and courses viz. manufacturing technology, manufacturing processes, element of mechanical engineering, energy conversion , refrigeration and air conditioning, power plant engineering robotics, mechatronics, two and three wheeler technology, advanced air pollution and control, internal combustion engine workshop and so on. he has attended many International, National Seminar and Conferences on different aspects of engineering.
  • He awarded his Ph.D in 2017 from Mechanical Engineering Department of Guru Jambheshwar University of Science and Technology, Hisar
  • He completed his M.Tech. in 2011 from Mechanical Engineering Department of Guru Jambheshwar University of Science and Technology, Hisar
  • He completed his B.Tech.(Mechanical Engineering) in 2009 from Maharishi Dayanand University Rohtak .
  • He worked as Teaching Sssociate (Assistant Professor) in Mechanical Engineering department of Guru Jambheshwar University of Science and Technology, Hisar from 2011-2013
  • Presently, he is associated with K. R. Mangalam University, Gurugram as an Associate Professor from January, 2018.
Other Research Achievements

  • Paper presented in International Scientific Conference: ICMSIT-2020 St. Petersburg, Russia, 4th March 2020. Paper presented in Materials today proceedings in 5th International Conference of Materials Processing and Characterization (ICMPC 2016) Hyderabad. Paper presented in International Conference of advances Materials and manufacturing applications (IConAMMA, 2017), Bengaluru.
  • Organizes one week Skill Development Program (SDP) on Advanced Trends in Mechanical Engineering (ATME- July 2018) organized by K.R. Mangalam University, Gurugram (Haryana)
  • Attended one week Skill Development Program (SDP) on Advanced Trends in Mechanical Engineering (ATME- July 2018) organized by K.R. Mangalam University, Gurugram (Haryana)
  • Attended technical workshop on Scanning Based Metrological Inspection and Reverse Engineering (April-2018) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Attended national seminar on Basics of Rheology and its Applications (May 2017) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana) supported by Haryana State Council for Science and Technology, Department of Science and Technology, Government of Haryana.
  • Attended one week Faculty Development Programme (FDP) on Advancements in Mechanical Engineering (Aug-Sep 2016) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana).
  • Attended workshop on Technical Manuscript Preparation with Latex (Dec 2015) organized by Jaypee University of Information Technology, Waknaghat (Himachal Pradesh)
  • Attended Short Term Training Programme (STTP) on Tribology of Bearings for Ultra Precision Machining (Apr 2013) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana).
  • Attended workshop on Simulation of Engineering Systems (Aug-2013) organized by TEQIP and Thapar University, Patiala (Punjab).
  • Attended short term training program on Basics & Applications of CFD (Aug-2013) organized by Thapar University, Patiala (Punjab).
  • Attended short term training program Hands on Training on CFD (Oct-2013) organized by Thapar University, Patiala (Punjab).
  • Subhav Singh and Kaushal Kumar (2020) A Study On Prefabrication Method As A Tool For Waste Minimization: Lean Manufacturing In Construction (2008-18) International Scientific Conference: ICMSIT-2020 St. Petersburg, Russia, 4th March 2020. ISBN 978-5-8088-1445-5 pp 258-260.
  • Subhav Singh and Kaushal Kumar (2020) Use of lean construction to deliver projects successfully, International Scientific Conference: ICMSIT-2020 St. Petersburg, Russia, 4th March 2020. ISBN 978-5-8088-1445-5 pp 262-263.
  • Subhav Singh, Kaushal Kumar, Kaaraayaarthi Sharma (2019) An Introduction To Lean Construction/Visual Management Tool In Construction Projects WCTR 2019 IIT Bombay 26-31May 2019.
  • Subhav Singh and Kaushal Kumar (2020) Study of Enabling Factors Affecting the Construction Project Delivery. GLRC 2020, Amity University Noida 25-26Feb2020
  • Deekshant Varshney, Kaushal Kumar (2020) Overview of Different Types of Welding Techniques for Alloys. GLRC 2020, Amity University Noida 25-26 Feb 2020
  • Deekshant Varshney, Kaushal Kumar (2020)   Mechanical And Chemical Properties Of Aluminum 6061 -T6 Amity University Noida 25-26 Feb 2020.
  • Deekshant Varshney, Kaushal Kumar (2020)   the Significant and Use Of Advanced Materials in Different Industries: A Special Case of Aerospace Industry ICMSIT-2020 St. Petersburg, Russia, 4th March 2020. ISBN 978-5-8088-1445-5 pp 112.
  • Deekshant Varshney, Kaushal Kumar (2020)   The benefits and advantages of aluminium 6061 over other available grades of aluminium. Sustainable Energy Systems: Innovative Perspectives, SES-2020 St. Petersburg, Russia OCTOBER 29-30, 2020.
  • Satish Kumar, Varinder Singh, Gurmeet Singh, Manikanwar Singh, Satish Chandra Ragit, and Kaushal Kumar (2020) , “Rheology of fly and bottom ash slurry at higher concentration”, (CHEMBIOEN-2020) 13-14 Feb2020 NIT Jalandhar.
  • Kaushal Kumar, Satish Kumar, Munish Gupta and Hem Chander Garg (2017), “Characteristics of fly ash in relation of soil amendment”, Materials today proceedings. 4; 527-532.
  • Kaushal Kumar, Satish Kumar, Munish Gupta and Hem Chander Garg, (2016), “Effect of addition of bottom ash on the rheological properties of fly ash slurry at varying temperature”, IOP Conf. Series: Materials Science and Engineering.149;012044.
  • Sukhraj Singh, Jonny Garg, Prabhjot Singh, Gurprit Singh, Kaushal Kumar, Jashanpreet Singh, Satish Kumar and Jatinder Pal Singh(2017),“Effect of hard faced Cr alloy on abrasive wear of low carbon rotavator blades using design of experiments”, Materials today proceedings.5; 3390-3395.
  • Kaushal Kumar, Satish Kumar, Chandra Bhushan Tripathi, Harish Sharma and Shashi Bhushan Prasad (2020), “parametric optimization of slurry erosion behavior of brass”, Materials today proceedings doi.org/10.1016/j.matpr.2020.02.330
  • Harish Kumar Sharma, Koushlendra kumar singh, Chandra Bhushan Tripathi, Satish Kumar, Shailesh Prasad, Kaushal Kumar, Piyush Singhal (2020),“Enhancement of Latent Heat Energy Storage System Using Nanomaterials for Different Applications: A Review”, Materials today proceedings doi.org/10.1016/j.matpr.2020.01.126.
  • Deekshant Varshney, Kaushal Kumar (2021), “Effects of activating flux on aluminum 6061 using TIG welding (GTAW)” AIP Conference Proceedings 2341, 040029 (2021).
  • Chandra Bhushan Tripathi, Satish Kumar, Sanjay, Gurmeet Singh, Shashi Bhushan Prasad, and Kaushal Kumar(2021), “Comparative study of erosion wear resistance on SS 430 and SS SD 2507”, AIP Conference Proceedings 2341, 040007 (2021) ;https://doi.org/10.1063/5.0050122
  • Monika Khatkar, Kaushal Kumar, Brijesh Kumar (2020), “An overview of distributed denial of service and internet of things in healthcare devices”, DOI: 10.1109/INBUSH46973.2020.9392171
  • Raman Yadav, Sharda Vashisth, Ranjit Varma and Kaushal Kumar(2021), “Effect of flow velocity and pressure on carotid artery due to deposition of different shapes of plaque” IOP Conference Series: Materials Science and Engineering, 1149, 012003.
  • Minakshi Katoch Kaushal Kumar Vineet Dahiya (2021), “Dust accumulation and reduction in electrical performance of solar PV panels” Materials today proceedings 46(15), 6608-6612.

Session Chair/Workshop/Seminar/Training/FDP

  • Attended one week AICTE Training And Learning (ATAL) Academy Online Elementary FDP on ” Manufacturing: Hindsight To Foresight” from (16-20 July 2021) at Birla Institute of Technology and Science, Pilani (BITS Pilani).
  • ttended one week Faculty Development Program (FDP) on AI and ML need of an hour (26-30- July 2021) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Attended one week Faculty Development Program (FDP) Artificial Intelligence and Machine Learning-Need of the hour (26-30- July 2021) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Attended one week Faculty Development Program (FDP) Recent Trends in Renewable Energy (02-06 August 2021) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Session chair in Sustainable Energy Systems: Innovative perspectives (SES-2020) Russia-India (October 2020) St. Petersburg, Russia.
  • Attended Short Term Program (STP) on Recent Trends in Energy Conversion Technologies (July 2020) with 25 CPD hours approved by Boards of Engineers Malaysia organized by University Malaysia in collaboration with The Institute of Engineers Malaysia.
  • Organizes one week Skill Development Program (SDP) on Advanced Trends in Mechanical Engineering (ATME- July 2018) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Attended one week Skill Development Program (SDP) on Advanced Trends in Mechanical Engineering (ATME- July 2018) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Attended technical workshop on Scanning Based Metrological Inspection and Reverse Engineering (April-2018) organized by K.R. Mangalam University, Gurugram (Haryana).
  • Attended national seminar on Basics of Rheology and its Applications (May 2017) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana) supported by Haryana State Council for Science and Technology, Department of Science and Technology, Government of Haryana.
  • Attended one week Faculty Development Program (FDP) on Advancements in Mechanical Engineering (Aug-Sep 2016) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana).
  • Attended workshop on Technical Manuscript Preparation with Latex (Dec 2015) organized by Jaypee University of Information Technology, Waknaghat (Himachal Pradesh).
  • Attended short term training program Hands on Training on CFD (Oct-2013) organized by Thapar University, Patiala (Punjab).
  • Attended workshop on Simulation of Engineering Systems (Aug-2013) organized by TEQIP and Thapar University, Patiala (Punjab).
  • Attended short term training program on Basics & Applications of CFD (Aug-2013) organized by Thapar University, Patiala (Punjab).
  • Attended Short Term Training Program (STTP) on Tribology of Bearings for Ultra Precision Machining (Apr 2013) organized by Guru Jambheshwar University of Science and Technology, Hisar (Haryana).
  • Kaushal Kumar, Satish Kumar, Munish Gupta and Hem Chander Garg (2018),“ Tribological behaviour of WC-10Co4Cr coated slurry pipe materials”, Industrial Lubrication and Tribology,70(9); 1721-1728.
  • Kaushal Kumar, Satish Kumar, Munish Gupta and Hem Chander Garg, (2018) “Effect of additives on static settled concentration, pH and viscosity of bottom ash-water suspension”, Journal of Mechanical Engineering – Strojnícky casopis.68(3); 49-58.
  • Kaushal Kumar (2020),“Rheological behavior of fly ash suspension with additive for hydraulic conveyance” International journal of Applied Mechanics and Engineering. 25(2); 202-210 .
  • Kaushal Kumar, Satish Kumar, Munish Gupta, Hem Chander Garg and Gurprit Singh (2017), “Measurement of flow characteristics for multiparticulate bottom ash-water suspension with additives”, Journal of Residuals science and technology,14(1);11-17.
  • Gurprit Singh, Satish Kumar, Saroj kumar Mahapatra and Kaushal Kumar (2017),“Comprehensive characterization of grounded bottom ash from Indian thermal power plant”, Journal of Residuals science and technology.14(1);1-10.
  • Kaushal Kumar, Satish Kumar, Gurprit Singh, Jatinderpal Singh and Jashanpreet Singh(2017),“ Erosion wear investigation of HVOF spray WC-10Co4Cr coating on slurry pipeline materials”,Coatings,54 (7); 1-11.
  • Satish Kumar, Kaushal kumar and Munish Gupta(2016), “Characterization of heavy metal trace elements in the fly ash from a thermal power”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.38(16); 2370–2376.
  • Subhav Singh and Kaushal Kumar (2020) , “Review of literature of lean construction and lean tools using systematic literature review technique (2008–2018)”, Ain Shams Engineering Journal. 11(2); 465-471.
  • Subhav Singh and Kaushal Kumar (2021) , “A study of lean construction and visual management tools through cluster analysis”, Ain Shams Engineering Journal. 12(1), 1153-1162.
  • Deekshant Varshney, Kaushal Kumar (2021) , “Application and use of different aluminium alloys with respect to workability, strength, and welding parameter optimization”, Ain Shams Engineering Journal 12(1), 1143-1152.
  • Deekshant Varshney, Kaushal Kumar (2021), “Structured review of papers on the use of different activating flux and welding techniques”, doi.org/10.1016/j.asej.2020.11.013
  • Deekshant Varshney, Kaushal Kumar (2021) , “Effects of activating flux (SiO2, Fe2O3) and welding parameters on performance of 6061 aluminium metal / alloy using welding (tig) ”, Organization, Technology & Management in Construction: An International Journal (Accepted).
  • Jaideep Kumar, A.K.Yadav,  Phool Singh and Kaushal Kumar (2020) , “Phase image assymetric encryption using Lorenz transform and modified equal modulus decomposition in fractional Fourier domain”, Solid State Technology. 63(5);5565-5580.
  • Shruti Gupta, Jyotsana Singh and Kaushal Kumar (2020), “Analyzing and modeling of activity patterns of stn-gp network in parkinson’s state vs normal state”, PalArch’s Journal of Archaeology of Egypt/Egyptology. 9(17) 9653-9663.

Book chapters

  • Shruti Gupta, Jyotsana Singh and Kaushal Kumar (2019),“Ionic concentration and action potential differences between a healthy and alzheimer’s disease person”, a book series of springer publication “communications in computer and information science”. Data Science and Analytics a book chapter in book series Communications in Computer and Information Science  (CCIS) volume 1229 pp 266-277 : ISBN 978-981-15-5826-9.
  • Kaushal Kumar, Ajay Kumar and Vinay Singh (2018) , “Optimization of Process Parameters for Erosion Wear in Slurry Pipeline”, In: Prasad A., Gupta S., Tyagi R. (eds) a book series of springer publication Advances in Engineering Design. Part of the Lecture Notes in Mechanical Engineering (LNME),pp 131-140. ISBN 978-981-13-6468-6
  • Vinay Singh, Ajay Kumar,Kaushal Kumar and Munish Gupta (2020) , “Synthesis and stability of Al2O3/water nanofluids”, ICFTMME-2020, 06-07 Nov,Organized by department of mechanical engineering, SRM Institute of science and technology, Delhi- NCR Campus.

Other Referred Journals

  • Kaushal Kumar and Vinay Singh (2017), “Theoretical investigation of bearing performance by using Non-Newtonian Lubricant”, Imperial journal of Interdisciplinary Research (IJIR).3(3): 711-713.
  • Vinay Singh and Kaushal Kumar (2017),“Data mining and knowledge management”, International journal of engineering research and technology.4(2);200-206
  • Pranav Kumar Gupta, Kaushal kumar and Ajay Kumar (2018), “Study and analysis of domestic ash & waste glass powder as partial replacement with cement”, International Journal of Civil Engineering and Technology 11(9); 1053–1062.